Improve your experience. We are very sorry but this website does not support Internet Explorer. We recommend using a different browser that is supported such as Google Chrome or Mozilla Firefox.

Coal Seam Gas Processing

This intensive and interactive three-day course is designed to address the operation and control of coal seam gas processing plants.

Description

Coal seam gas processing involves gathering gas from well heads at near atmospheric pressure through the use of 
screw compressors. The gas is then compressed and dehydrated in gas plants utilising centrifugal compressors and tri-ethylene glycol (TEG) dehydration. Centrifugal gas compressors, screw compressors and glycol dehydration are therefore the core topics which will be covered in detail. Each topic will be covered using a mix of short lectures, videos, dynamic simulation models and group workshops. 

Key Topics Covered

 Centrifugal Compressor Control and Operation 

  • Compression Principles 
  • Compressor Performance 
  • Capacity Control 
  • Simple Anti-Surge Control 
  • Compressor Protection 

Screw Compressor Control and Operation 

  • Advantages and Disadvantages of Screw Compressors 
  • Compression Principles 
  • Oil Injected Screw Compressors 
  • Oil Free Screw Compressor 
  • Screw Compressor Controls 
  • Screw Compressor Operation 

Glycol Dehydration 

  • The Glycol Dehydration Process 
  • Functional Design 
  • Contactor Section Design 
  • Regeneration Section Design 
  • Process Control 
  • Process Operation

Course Outline Requests

To view the course outline for this coal seam gas processing training course, click the link and enter your email. You will receive a confirmation email with the course outline link attached.

Course Outline

Suitable For:

This course is designed for participants with little or no prior coal seam gas processing experience. A basic understanding of unit operations including centrifugal compressors and glycol dehydration would be an advantage but not necessary. Operations personnel who have some level of responsibility for the operation, control or management of the coal seam gas processing facility would benefit most from this course. 

Similar courses

Problem Solving & Troubleshooting in Process Operations

This two-day course is designed to teach operations personnel how to effectively troubleshoot problems on process plants. Solving problems quickly and effectively leads to increased productivity and saves money.

More Information
Fundamentals of Control Room Operations - PEARL

We specialize in training control room operators using our state of the art PEARL simulator. It is portable so we can deliver the training at your location or ours. The courses are usually 4 or 5 days in duration and are highly intensive and 'hands-on'. We also offer shorter 'aptitude' courses where we help to assess the suitability of operators to move into the control room environment.

More Information
Carbon Dioxide Compression

This two-day course uses dynamic simulation models to give a practical introduction to carbon dioxide, its application, characteristics, and carbon capturing technology. This course also covers the principles of gas compression when CO2 is the process medium, the selection of the correct type of compressor, the design of the compressor, how performance of the compressor is controlled and more.

More Information
Control Loop Tuning

This one-day course will better help delegates be able to identify opportunities for increasing plant performance and deliver that performance by the use of good control loop tuning techniques.

More Information
Control & Operation of Distillation Columns

This three-day course offers a comprehensive study of distillation technology and provides an introduction to a variety of processes which employ this key unit operation.

More Information
Crude Oil Refining - A Practical Introduction

This three-day course is aimed to satisfy the need for understanding the technical design and risk areas for a typical crude oil refining plant. The fundamentals of the oil refining process will be explained including the distillation process, hydrocarbon chain length modification processes, gas recovery treatment and sulphur removal processes. A key objective is to stress the safety and environmental risk areas and how those are mitigated with the technical design and strict procedures.

More Information
Design & Operation of FPSOs

This three-day course has been designed to provide a comprehensive study into the subject of modern floating production systems. The subject matter is presented in a manner to reflect what might be considered a standard project development path and encompasses the areas of technology, engineering, project management and legislation.

More Information
FPSO - A Non Technical Overview

This one-day course is intended to give a comprehensive overview of the nature and purpose of a floating production, storage and offtake system, commonly called an FPSO. In the business of offshore oil production, such systems have become very popular over the last 15 years and they are used throughout the world.

More Information
LNG - A Non Technical Overview

The LNG industry has a safety record of which it is justifiably proud. This has been achieved by a recognition that the product can be, if not handled correctly, extremely hazardous. By a combination of good design, high quality engineering, well-practiced procedures and a well trained workforce, the hazards are managed and risks are minimised. In developing the course the need to emphasise the safety aspects has been recognised and is covered to a suitable level.

More Information
LNG - A Technical Overview

This practical three-day course aims to satisfy the need for understanding the role LNG plays in the energy market.

More Information
Natural Gas Compressor Station Operation

This three-day natural gas compressor course will use dynamic simulation models to give a practical introduction to centrifugal gas compressors, their turbine drivers, and their operation within a typical gas compressor station. This course will include operating principles, mechanical design, and control strategies.

More Information
Natural Gas Treatment Processes

This intensive three-day natural gas processing training course is designed to address the operation and control of natural gas processing equipment for onshore fields.

More Information
Practical Aspects of Process Control & Instrumentation

This course gives a practical introduction to the principles of measurement and control of process plants. It is a hands-on course and participants will have the opportunity to explore the set-up and tuning of control loops using simulation and other computer-based training packages.

More Information
Principles of Amine Treatment

This intensive and interactive two-day course is designed to give a comprehensive study of the amine treatment process. The course explores the process from several different perspectives; what the plant is designed to do, how it does it, how it's designed, process controls and safeguards and conventional system start-up and shutdown. The topics are covered using a mix of short lectures, videos, dynamic simulation models and group workshops.

More Information
Principles of Glycol Dehydration

This two-day course is designed to provide a comprehensive study of the glycol dehydration process. The course explores the process from several different perspectives, including what the plant is designed to do, how it does it, the design of the equipment, how the process is controlled and safeguarded, and conventional start-up and shutdown operations. The topics are covered using a mix of short lectures, video, dynamic simulation and group workshops.

More Information
Production Process & Emergency Systems on Oil & Gas Installations

This intensive three-day course offers an introduction and comprehensive overview of production, processing and emergency systems on offshore facilities. The general trend is to make offshore processing as simple as possible while ensuring safety of personnel and assets.

More Information
Reservoir Engineering & Drilling - A Non Technical Overview

This one-day course is perfect for all non-technical executives, whether involved directly within the oil and gas industry or in a supporting industry. Covering numerous topics from how reservoirs are formed through to the actual production phase, this course will provide all those without a technical background to have a better understanding of both reservoir engineering and drilling.

More Information
Subsea Systems

This two-day course is intended to provide a comprehensive study of subsea systems. The coverage will include the design of such systems, the equipment installed and how the system is monitored and controlled from the platform. The course assumes that the participants already have some understanding of petroleum production technology and a basic understanding of process control and safeguarding systems will also be an advantage.

More Information
Subsea Systems - A Non Technical Overview

This one-day course offers an overview of the subsea systems within the offshore oil and gas industry and is written and presented in a manner suitable for people of a non-technical background. By providing a better understanding of the subsea section of the industry, it will enable all those working within this section to offer more effective support to their technical colleagues.

More Information
The Oil & Gas Industry - A Non Technical Overview

This one-day course offers an overview of the oil and gas industry and is written and presented in a manner suitable for people of a non-technical background.

More Information
Well Management & Artificial Lift

This two-day course provides a comprehensive study of the formation of oil and gas reservoirs, their flow characteristics and management to optimise recovery both naturally and by use of artificial means.

More Information

Press enter to see more results