Upcoming Courses

31 Jan 2022 - 1 Feb 2022

2 days, 7:00 AM - 3:00 PM

This two-day course offers delegates an overview of the design, construction, control and operation of reciprocating compressors. The course describes the principles of operation of the compressor and how the design is adapted to a number of different configurations to meet numerous needs. A fundamental understanding of gas behaviour will be an asset but not mandatory for this course.

2 - 4 Feb 2022

3 days, 7:00 AM - 3:00 PM

This hands-on, three-day course uses dynamic simulation models to give a practical introduction to centrifugal gas compressors and their operation in process plants. The practical exercises and workshops will use dynamic simulation models of compression systems running on PCs. They will be easy to use and the participants will require no prior knowledge of dynamic simulation.

Mon 7 Mar 2022

1 day, 7:00 AM - 3:00 PM (8 hours)

The LNG industry has a safety record of which it is justifiably proud. This has been achieved by a recognition that the product can be, if not handled correctly, extremely hazardous. By a combination of good design, high quality engineering, well-practiced procedures and a well trained workforce, the hazards are managed and risks are minimised. In developing the course the need to emphasise the safety aspects has been recognised and is covered to a suitable level.

8 - 10 Mar 2022

3 days, 7:00 AM - 3:00 PM

This practical three-day course aims to satisfy the need for understanding the role LNG plays in the energy market.

11 - 12 Apr 2022

2 days, 7:00 AM - 3:00 PM

This two-day course explores the construction and configuration of the centrifugal compressor in some detail. It is an add-on to our Control & Operation of Centrifugal Compressors training course but is also run as a stand-alone package.

25 - 26 Apr 2022

2 days, 8:00 AM - 4:00 PM

This two-day course is designed to provide a comprehensive study of the glycol dehydration process. The course explores the process from several different perspectives, including what the plant is designed to do, how it does it, the design of the equipment, how the process is controlled and safeguarded, and conventional start-up and shutdown operations. The topics are covered using a mix of short lectures, video, dynamic simulation and group workshops.

25 - 26 Apr 2022

2 days, 7:00 AM - 3:00 PM

This two-day course is designed to provide a comprehensive study of the glycol dehydration process. The course explores the process from several different perspectives, including what the plant is designed to do, how it does it, the design of the equipment, how the process is controlled and safeguarded, and conventional start-up and shutdown operations. The topics are covered using a mix of short lectures, video, dynamic simulation and group workshops.

Mon 2 May 2022

1 day, 8:00 AM - 4:00 PM (8 hours)

The LNG industry has a safety record of which it is justifiably proud. This has been achieved by a recognition that the product can be, if not handled correctly, extremely hazardous. By a combination of good design, high quality engineering, well-practiced procedures and a well trained workforce, the hazards are managed and risks are minimised. In developing the course the need to emphasise the safety aspects has been recognised and is covered to a suitable level.

3 - 5 May 2022

3 days, 8:00 AM - 4:00 PM

This practical three-day course aims to satisfy the need for understanding the role LNG plays in the energy market.

16 - 17 May 2022

2 days, 8:00 AM - 4:00 PM

This two-day course is designed to teach operations personnel how to effectively troubleshoot problems on process plants. Solving problems quickly and effectively leads to increased productivity and saves money.

18 - 19 May 2022

2 days, 8:00 AM - 4:00 PM

An intensive, two-day course where delegates will gain a thorough introduction to the subject of positive displacement oil-injected helical screw compressors. The course is designed to explore many factors in the selection, operation, and control systems of the screw compressor for a particular application.

18 - 19 May 2022

2 days, 7:00 AM - 3:00 PM

An intensive, two-day course where delegates will gain a thorough introduction to the subject of positive displacement oil-injected helical screw compressors. The course is designed to explore many factors in the selection, operation, and control systems of the screw compressor for a particular application.

30 - 31 May 2022

2 days, 8:00 AM - 4:00 PM

This two-day course offers delegates an overview of the design, construction, control and operation of reciprocating compressors. The course describes the principles of operation of the compressor and how the design is adapted to a number of different configurations to meet numerous needs. A fundamental understanding of gas behaviour will be an asset but not mandatory for this course.

1 - 3 Jun 2022

3 days, 8:00 AM - 4:00 PM

This hands-on, three-day course uses dynamic simulation models to give a practical introduction to centrifugal gas compressors and their operation in process plants. The practical exercises and workshops will use dynamic simulation models of compression systems running on PCs. They will be easy to use and the participants will require no prior knowledge of dynamic simulation.