Upcoming Courses

6 - 7 Jun 2022

2 days, 8:30 AM - 4:30 PM

This two-day course offers delegates an overview of the design, construction, control and operation of reciprocating compressors. The course describes the principles of operation of the compressor and how the design is adapted to a number of different configurations to meet numerous needs. A fundamental understanding of gas behaviour will be an asset but not mandatory for this course.

8 - 10 Jun 2022

3 days, 12:30 AM - 8:30 AM

This hands-on, three-day course uses dynamic simulation models to give a practical introduction to centrifugal gas compressors and their operation in process plants. The practical exercises and workshops will use dynamic simulation models of compression systems running on PCs. They will be easy to use and the participants will require no prior knowledge of dynamic simulation.

8 - 9 Jun 2022

2 days, 8:30 AM - 4:30 PM

This two-day course is designed to teach operations personnel how to effectively troubleshoot problems on process plants. Solving problems quickly and effectively leads to increased productivity and saves money.

Mon 13 Jun 2022

1 day, 8:30 AM - 4:30 PM (8 hours)

This one-day course will better help delegates be able to identify opportunities for increasing plant performance and deliver that performance by the use of good control loop tuning techniques.

12 - 13 Jul 2022

2 days, 8:30 AM - 4:30 PM

An intensive, two-day course to provide insight into how to troubleshoot a wide variety of problems that can occur with centrifugal compressors and their gas turbine or electric motor driver. The course will include a series of simulated practical case studies where delegates will be challenged to identify and correct real-life problems using a standard troubleshooting methodology.

25 - 27 Jul 2022

3 days, 8:30 AM - 4:30 PM

This three-day course has been designed to provide a comprehensive study into the subject of modern floating production systems. The subject matter is presented in a manner to reflect what might be considered a standard project development path and encompasses the areas of technology, engineering, project management and legislation.

Thu 28 Jul 2022

1 day, 8:30 AM - 4:30 PM (8 hours)

This one-day course is intended to give a comprehensive overview of the nature and purpose of a floating production, storage and offtake system, commonly called an FPSO. In the business of offshore oil production, such systems have become very popular over the last 15 years and they are used throughout the world.

15 - 17 Aug 2022

3 days, 8:30 AM - 4:30 PM

This practical three-day course aims to satisfy the need for understanding the role LNG plays in the energy market.

Thu 18 Aug 2022

1 day, 8:30 AM - 4:30 PM (8 hours)

The LNG industry has a safety record of which it is justifiably proud. This has been achieved by a recognition that the product can be, if not handled correctly, extremely hazardous. By a combination of good design, high quality engineering, well-practiced procedures and a well trained workforce, the hazards are managed and risks are minimised. In developing the course the need to emphasise the safety aspects has been recognised and is covered to a suitable level.

22 - 24 Aug 2022

3 days, 8:30 AM - 4:30 PM

This course gives a practical introduction to the principles of measurement and control of process plants. It is a hands-on course and participants will have the opportunity to explore the set-up and tuning of control loops using simulation and other computer-based training packages.

31 Aug 2022 - 2 Sep 2022

3 days, 8:30 AM - 4:30 PM

This hands-on, three-day course uses dynamic simulation models to give a practical introduction to centrifugal gas compressors and their operation in process plants. The practical exercises and workshops will use dynamic simulation models of compression systems running on PCs. They will be easy to use and the participants will require no prior knowledge of dynamic simulation.

5 - 6 Sep 2022

2 days, 8:30 AM - 4:30 PM

This two-day course offers delegates an overview of the design, construction, control and operation of reciprocating compressors. The course describes the principles of operation of the compressor and how the design is adapted to a number of different configurations to meet numerous needs. A fundamental understanding of gas behaviour will be an asset but not mandatory for this course.

26 - 27 Sep 2022

2 days, 8:30 AM - 4:30 PM

This two-day course is designed to teach operations personnel how to effectively troubleshoot problems on process plants. Solving problems quickly and effectively leads to increased productivity and saves money.

3 - 4 Oct 2022

2 days, 8:30 AM - 4:30 PM

This two day course is designed to provide the tools and knowledge to identify and solve the most common pumping system problems. The fundamentals of both dynamic and positive displacement pumping systems will be covered as well as pump selection and control.

31 Oct 2022 - 1 Nov 2022

2 days, 8:30 AM - 4:30 PM

An intensive, two-day course where delegates will gain a thorough introduction to the subject of positive displacement oil-injected helical screw compressors. The course is designed to explore many factors in the selection, operation, and control systems of the screw compressor for a particular application.

7 - 9 Nov 2022

3 days, 8:30 AM - 4:30 PM

This two-day course is designed to provide a comprehensive study of the glycol dehydration process. The course explores the process from several different perspectives, including what the plant is designed to do, how it does it, the design of the equipment, how the process is controlled and safeguarded, and conventional start-up and shutdown operations. The topics are covered using a mix of short lectures, video, dynamic simulation and group workshops.

14 - 16 Nov 2022

3 days, 8:30 AM - 4:30 PM

This course gives a practical introduction to the principles of measurement and control of process plants. It is a hands-on course and participants will have the opportunity to explore the set-up and tuning of control loops using simulation and other computer-based training packages.

28 - 29 Nov 2022

2 days, 8:30 AM - 4:30 PM

This two-day course offers delegates an overview of the design, construction, control and operation of reciprocating compressors. The course describes the principles of operation of the compressor and how the design is adapted to a number of different configurations to meet numerous needs. A fundamental understanding of gas behaviour will be an asset but not mandatory for this course.